Caught my boy reading under the banner


Caught my boy reading under the banner
Originally uploaded by Bassoon Man.

Having just returned home from Junction, I couldn’t wait for my first opportunity to go down to the beach (Doheny State Park) and put up my banner and send my carp on its maiden voyage. As usual, there was almost no wind but I managed to get both up. My boy, located under the banner, spent the afternoon reading a book while I tried out my new fighters for the first time. I had no luck with the Hoopty and just limited success with the Fandango. I’ll keep trying. At the moment, I think I’ll start working on my next banner.

Junction Kite Makers Retreat 2007

As I’ve noted before, I’ve got a new addiction – kites. Yeah, it’s rather amazing to think that I’m hooked on this wonderful sport (my mother doesn’t quite know how to tell her friends that her son, a grown man, is now playing with kites) but I’m having a blast with them. As this wonderful hobby can get quite expensive, I took a challenge made of me on one of the Kite Aerial Photography forums and decided to try and make my own. Some of my earliest attempts are already outlined on this blog. Anyway, I lucked out and found a very cheap flight to San Antonio, Texas, so that I could attend this year’s Kite Makers Retreat held at the Texas Tech University Extention Center in Junction.

While I’ve already ranted about my lost luggage (so I’ll spare those details here), I’ve just finished looking at the (few) photos I was able to take – my cameras didn’t arrive until Sunday afternoon, along with the rest of my luggage. Some (most) of them are posted below. As I’ve already mentioned, I arrived very late (early) after driving approximately 120 miles to Junction. I was so tired (it was 4 AM) that I checked into a local motel for a few hours so that I could get a bit of sleep before driving the last few miles to the retreat. I arrived sometime around noon on Friday (May 25th). At that point, I only had one kite (my Rev 1.5), and a few other items. Fortunately, there were already several people around as they were sitting on the kite field watching a few fliers. It was at that time that I met Bob, one of the esteemed instructors, who introduced me to “fighter kites” for the first time – small, highly maneauverable single-line kites. While they are very small and rather delicate, they can do rather amazing things (in the hands of an experienced fighter, that is). Bob gave me a few lessons on fighters and I had a great time.

The kite retreat didn’t officially begin until dinner that night so I spent the time looking around at some of the fighters on display and chatting with various people as they arrived. I also got a chance to fly my Rev but the wind conditions weren’t too favorable – as always, the winds died down the moment I began to fly. (So, what else is new?) That; however, lead to another great moment, another guy, Sid, had also brought one of his Revs but it was different than mine – it was even lighter. As a result, he gave me a few lessons and I spent quite a bit of time flying his Rev (I just bought a set of lighter spars yesterday so that my kite will now be able to fly in similar low-wind conditions too).

360 Degree View of Junction Kite Field

Click to see 360° view of the kite field

Friday night was devoted to making drums with Bob (oh, what fun) and just hanging out. There were so many different courses to choose from, on Saturday, that it was difficult to pick which one I wanted to attend. I ended up going to the crap [sic] making class (we really made “carp” windsocks but, due to a typo prior to the retreat, the class was inadvertently renamed). I spent the entire day (eight hours) making my carp – I learned how to applique, along with other fun kite making techniques. Fortunately, I was able to use someone else’s equipment as I didn’t have mine with me (it was lost with my luggage).

Late Saturday night featured “bait night” – as a Junction tenderfoot, I hadn’t a clue as to what that meant but quickly learned it was an outdoor gathering where everyone sits around and eats gross stuff (i.e., “bait”) like smoked oysters (yum), eel (yum), and God only knows what else ! Of course, we had a great time!

Banners at Junction Kite Makers RetreatSunday afternoon offered another set of classes – this time I took the banner class with Eddie – my finished 15 foot banner (the solid blue one) is pictured at the left. Of course, there were others who were far more experienced and made rather elaborate ones too – Eddie’s is the black one with the sun and Janet (one of our “crap” instructors) put one of her “craps” on her banner. As I am still a beginner – I just made a solid colored one. I plan on adding stars to mine, along with two other banners – solid red and solid white. How patriotic!

After my luggage arrived (Sunday afternoon), I finally had my equipment. I immediately startedField of deer at Junction sewing my banner with my own machine and worked until dinner. One of the things I hadn’t yet experienced were the deer that were allegedly hiding just outside our view at all times. As I was whining about that, some of the kind folks at the retreat pointed out that a few million (or so) of them had decided to come out from the trees and had parked themselves on the kite field. As to be expected, I grabbed my camera and SLOWLY walked out onto the field (which is far bigger than it looks). The deer, of course, were extremely aware of me too and had no intention of letting me get too close. Just the same, I did manage to get a few pictures of them – if you look closely at the photo to the right (double click on it for a larger view), there appear to be about two dozen of them resting on the ground.

Junction Flying FieldThe time went by too quickly and Monday morning was our last class. I spent the time finishing my banner and puting it up on display (how fun). It actually turned out okay and I’m rather proud of it!

The retreat ended after lunch and we had to pack up. I returned to San Antonio that afternoon but was too tired to do much – I ended up taking a nap (until 8 PM, no less) and caught a late night movie. I knew I would have some free time the next day so I wasn’t rushed. One of the thingsFaçade of the Alamo I had planned to do while in San Antonio was to “remember the Alamo!” Obvioiusly, I remembered as attested by the following photo.

While the Alamo is rather small, it was quite scenic and I’m glad I went. The following is a photo of a veranda that I managed to get without any tourists walking through it (I was lucky).

Veranda at the Alamo

So, after all of the wonderful experiences I had (except for the lost luggage), will I go again? I sure hope so! I met all kinds of wonderful people and had a terrific time. Can’t wait until next year!

Fighter kites and a master fighter

Okay, so I’m posting things out of order – I haven’t written my post regarding the GREAT time I had at the Junction Kite Makers Retreat (I’ve already posted my American Airlines rant [they still have NOT responded to my complaint] and haven’t yet looked that the few photos I took – I’ve just been too worn out to do much since I got home). Even so, I’ve spent some time (while I wasn’t sleeping) looking up fighter kites on the Internet, which I was first introduced to at Junction. While we did not make them, I had a chance to fly one on my first day there. Fighters are very small (in fact, they’re surprisingly small) single line kites that are highly maneuverable. In addition to making more of the same of the goodies I created at Junction, I wanted to try and make my own fighters. Yesterday, I stopped by a few stores and purchased some Mylar, along with a few other supplies. Unfortunately, according the instructions I’ve found on the Internet, fighters are now usually made with carbon rods for durability.

What surprised me even more; however, is that I was just introduced (only a few weeks ago), to a man by the name of Vic who runs a well-known kite shop called “Kite Country” in San Diego. Little did I know at that time that Vic is considered to be quite famous in the fighter kite world as not only a champion fighter but also as a master fighter kite maker! His kite, “Vic’s Fighter” is still highly regarded by kiters (is that a real word?) around the world. So. . . I decided to take a quick jaunt down to his shop today (about 72 miles from home) to pick up some carbon rods and a few other goodies. Okay, I spent a bit too much (UGH)! Just the same, I got to pick Vic’s brain for quite a long time and learned a lot (the only problem is I probably won’t remember even half of what he told me).

Much of what Vic did have to say was quite fascinating! He told me stories about how he has chased everything from joggers to dogs on the beach (who hadn’t a clue that they were being followed by a kite) as well as having his kites “peer” into the windows of hotel visitors. While my experience with fighters is currently very limited (I got to fly one at Junction), these kites are, apparently, VERY maneuverable. Can’t wait to try some more!

In addition to four fighter kites (a Hoopty, a Fandango, and a Flick [all by esteemed kite maker, Jeff Howard], as well as an Indian made Mylar fighter with bamboo spars, I bought my son a Rev (so he will be able to fly his own, instead of mine)! I’ll have to post pictures of these kites later. I also purchased some carbon rods and other small hardware so I can try my hand at making my own – which is something that I would prefer to do, once I learn how, that is!